List of Documents

Hall C Songsheets
Injector Quick Reference Drawings

README (9/15/02)
Analysis Howto (12/01/03)
Analysis shift taker TODO list (12/01/03)

OLD documents:

Analysis Howto (12/07/02)
Howto get a copy of g0analysis (10/21/03)
Analysis Topics Summary (12/09/02)
DMCH Analysis Howto (11/8/02)
GONAG Manual (11/27/02)
G0 Scripts Library
Fastbus Manual (10/26/02)
ACM Manual (8/20/02)
G0 Analysis Manual (10/3/02)

Halo Manual (2/16/03)
Beam Manual (2/17/04)
Charge Asymmetry Feedback Fix (12/14/02)
Helicity Correlated Devices (12/09/02)
Superharp Howto (9/11/02)
BPM GUI Howto (9/11/02)
Injector Howto (11/14/02)
Beam Halo Howto (11/6/02)
G0 Beam Feedback Howto (12/13/02)
HC setup for Long Asymmetry Runs (12/09/02)
Adiabatic Damping Howto (12/09/02)
Charge Asymmetry Feedback Howto (12/14/02)
Beam Cavity Monitors (12/04/02)
G0 Beam Specs

DAQ README (9/14/02)
Quick User's Guide (G0 DAQ Howto) (12/01/03)
G0 Racks Layout (7/19/02)
Channel Layout (12/06/02)
CODA Manual
CODA Manual Appendix
"cedit" executable manual
DAQ Plan (2/15/01)
Main Trigger Control (3/22/01)
GMS & Fastbus Trigger (3/22/01)

Shift worker's guide to the detector HV program
High Voltage Howto for both NA and FR (9/17/02)
HV Protection Board for both NA and FR (11/6/02)

NA detector README (9/14/02)
NA Detector Howto Manual (9/14/02)
NA Detector Description (8/22/02)
NA FPD Mounting (8/22/02)

French Detectors:

French Detector Howto Manual (10/23/02)
PMT Base for French PMTs (8/21/02)
French Optical Fiber System (8/21/02)
Low Voltage Power Supply (8/21/02)
PMT Description (8/21/02)

NA Electronics:

Troubleshooting Guide (1/31/02)
Electronics Plan (6/12/02)
NA Electronics Summary (1/31/02)
NA Electronics Layout (8/22/02)

French Electronics:

French Electronics Howto (9/14/02)
Differential non-linearity manual (1/11/04)
French DMCH Howto (10/11/02)
French Electronics DAQ with CODA
Table of contents for French Electronics (9/09/02)
Mapping of Back and Front Panel French Splitters

GMS Howto Manual (8/26/02)
GMS Optics Setup (8/20/02)
GMS Laser Operating Procedure (8/26/02)
GMS Schematic (8/26/02)

Moller Polarimeter:

README for G0 part of Moller Analysis Code (8/21/02)
Starting Moller with Magnet normally off
Starting Moller with Magnets all on
General README of Moller

Safety Documentations:

ESAD README
COO README
G0 Safety Checklist (9/18/02)
G0 Safety Checklist over Holidays (9/18/02)
G0 RSAD (11/11/03)
G0 ESAD (11/11/03)
G0 Experiment COO (11/11/03)
G0 Installation COO (4/8/02)

README
Troubleshooter (9/05/02)
SMS OSP (11/25/02)
Magnet Training Guide (10/25/02)
24 Inch Gate Valve Operation (10/25/02)

Hall C Target Link
Target Howto Manual (11/20/03)
Target Gas Handling User's Guide (10/15/02)
Target Control System Manual (11/20/03)

Send additions, corrections, and updates to Kaz Nakahara at
nakahara@jlab.org.